|
12/6/2004 | uboot | Had u-boot initially built and running on the RP614. Only the serial console
and the SDRAM works. |
12/11/2004 | uboot | Found the problem about the flash driver, finally got the u-boot running
wth full feature. |
12/13/2004 | RP614 | Found some clue about how to reset the Broadcom switch and how to toggle
the from panel LEDs. |
12/15/2004 | Toolchain | Finally had the arm-elf-gcc 2.95.3 toolchain built under cygwin
environment. |
2/10/2005 | linux | Finally, I got the linux booted up. |
2/20/2005 | linux | RP614 became a router again but with Linux! The router is equipped wth
- rp-pppoe for ADSL connection
- udhcpd for giving out IP addresses
- iptables for routing/NAT set up
|